Reloading Dies
Reloading dies are special tools that are fixed into the tool head of the press and are specific for each calibre.
There are 6 basic functions of dies: de-priming, sizing, powder charging, expanding, seating and crimping.
The sizing and depriming functions are usually combined in one die, wherethe case is cleared of the old primer and sized to factory dimensions. The sizing is performed either on the entire length of the cartridge case (full length sizing) or just a neck only (collet/neck sizing dies - available only for bottle cases).
The expanding and powdering function is most often combined in pistol calibre dies. The purpose of the expanding function of the die is to create a slight flare on the neck of the brass case to make it easier to seat the bullet. During this operation, the case may also be charged with gunpowder using either attached automatic powder dispenser, or manually through attached powder funnel.
The seating die is used for the accurate seating of the bullet
Number of records: 5253
RCBS .310 Neck Expanding Die designed to flare the case neck to ensure perfect alignment of the bullet during seating.
47,42 EUR
Backordered item
RCBS .311 Neck Expanding Die designed to flare the case neck to ensure perfect alignment of the bullet during seating.
47,42 EUR
Backordered item
RCBS .321 Neck Expanding Die designed to flare the case neck to ensure perfect alignment of the bullet during seating.
47,42 EUR
Backordered item
RCBS .243 Neck Expanding Die designed to flare the case neck to ensure perfect alignment of the bullet during seating.
47,42 EUR
Backordered item
RCBS .257 Neck Expanding Die designed to flare the case neck to ensure perfect alignment of the bullet during seating.
47,42 EUR
Backordered item
RCBS .264 Neck Expanding Die designed to flare the case neck to ensure perfect alignment of the bullet during seating.
47,42 EUR
Backordered item
RCBS Neck Expander Plug Rod goes with Neck Expanding Die, which does the neck flaring.
7,80 EUR
Backordered item
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber 7MM WBY MAG
70,71 EUR
Backordered item
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber 7MM REM ULTRA MAG
70,71 EUR
Backordered item
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber 7MM STW
70,71 EUR
Backordered item
RCBS Neck 2-Die Set 7MM STW includes a Neck Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug.
73,84 EUR
Backordered item
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber 7MM REM SA ULTRA MAG
70,71 EUR
Backordered item
RCBS Neck 2-Die Set 7MM REM MAG includes a Neck Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug.
73,84 EUR
Backordered item
The RCBS Small Base Sizer Die Set is designed specifically for reloading bottleneck cases that will be used in tight-chambering semi-automatic, pump, or lever-action rifles.
73,84 EUR
Backordered item
RCBS's Neck Sizer Die features an Expander-Decapping Unit. It resizes the case neck only (it doesn't touch the shoulder or body) and de-primes.
60,63 EUR
Backordered item
RCBS Neck 2-Die Set .257 WBY MAG includes a Neck Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug.
105,30 EUR
Backordered item
The RCBS Small Base Sizer Die Set is designed specifically for reloading bottleneck cases that will be used in tight-chambering semi-automatic, pump, or lever-action rifles.
73,84 EUR
Backordered item
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber .257 ROBERTS
70,71 EUR
Backordered item
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber .25-35 WIN
70,71 EUR
Backordered item
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber .260 REM
70,71 EUR
Backordered item
RCBS's Neck Sizer Die features an Expander-Decapping Unit. It resizes the case neck only (it doesn't touch the shoulder or body) and de-primes.
60,63 EUR
Backordered item
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber .264 WIN MAG
70,71 EUR
Backordered item
RCBS Neck 2-Die Set .264 WIN MAG includes a Neck Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug.
105,30 EUR
Backordered item
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber .25-06
70,71 EUR
Backordered item
RCBS Neck 2-Die Set .25-06 includes a Neck Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug.
73,84 EUR
Backordered item
RCBS's Neck Sizer Die features an Expander-Decapping Unit. It resizes the case neck only (it doesn't touch the shoulder or body) and de-primes.
60,63 EUR
Backordered item
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber .243 WIN
70,71 EUR
Backordered item
RCBS Neck 2-Die Set .243 WIN includes a Neck Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug.
73,84 EUR
Backordered item
RCBS's Neck Sizer Die features an Expander-Decapping Unit. It resizes the case neck only (it doesn't touch the shoulder or body) and de-primes.
60,63 EUR
Backordered item
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber .25 WSSM
70,71 EUR
Backordered item
