Reloading Dies
Reloading dies are special tools that are fixed into the tool head of the press and are specific for each calibre.
There are 6 basic functions of dies: de-priming, sizing, powder charging, expanding, seating and crimping.
The sizing and depriming functions are usually combined in one die, wherethe case is cleared of the old primer and sized to factory dimensions. The sizing is performed either on the entire length of the cartridge case (full length sizing) or just a neck only (collet/neck sizing dies - available only for bottle cases).
The expanding and powdering function is most often combined in pistol calibre dies. The purpose of the expanding function of the die is to create a slight flare on the neck of the brass case to make it easier to seat the bullet. During this operation, the case may also be charged with gunpowder using either attached automatic powder dispenser, or manually through attached powder funnel.
The seating die is used for the accurate seating of the bullet
Number of records: 5253
RCBS Matchmaster – Neck Size Bushing Die Set for caliber .22 Creedmoor. Matchmaster seating die with bullet seating window and with bullet retaining system.
6 036,00 Kč
Backordered item
RCBS Matchmaster – Neck Size Bushing Die Set for caliber .22-250 Remington. Matchmaster seating die with bullet seating window and with bullet retaining system.
6 036,00 Kč
Backordered item
RCBS Matchmaster – Neck Size Bushing Die Set for caliber .223 Remington. Matchmaster seating die with bullet seating window and with bullet retaining system.
6 036,00 Kč
Backordered item
RCBS Matchmaster – Neck Size Bushing Die Set for caliber .243 Winchester. Matchmaster seating die with bullet seating window and with bullet retaining system.
6 036,00 Kč
Backordered item
RCBS Matchmaster – Neck Size Bushing Die Set for caliber 6mm Dasher. Matchmaster seating die with bullet seating window and with bullet retaining system.
6 036,00 Kč
Backordered item
RCBS Matchmaster – Neck Size Bushing Die Set for caliber 7mm Remington Magnum. Matchmaster seating die with bullet seating window and with bullet retaining system.
6 036,00 Kč
Backordered item
RCBS .416 Neck Expander Plug goes with .416 Neck Expanding Die, which does the neck flaring.
425,00 Kč
Backordered item
These replacement decapping units feature an expander rod, expander ball, and decapping pin.
319,00 Kč
Backordered item
RCBS 224 Valkyrie Small Base Taper Crimp Die Set
1 998,00 Kč
Backordered item
RCBS 6.5mm GRENDEL Small Base Taper Crimp Die Set
1 998,00 Kč
Backordered item
RCBS .22 NOSLER Small Base Taper Crimp Die Set
1 998,00 Kč
Backordered item
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber 6.5 GRENDEL
1 697,00 Kč
Backordered item
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber 6.8 Western
1 697,00 Kč
Backordered item
RCBS Matchmaster – Full Length Bushing Die Set for caliber .22 CREEDMOOR. Matchmaster seating die with bullet seating window and with bullet retaining system.
6 036,00 Kč
Backordered item
RCBS Matchmaster – Full Length Bushing Die Set for caliber .204 RUGER. Matchmaster seating die with bullet seating window and with bullet retaining system.
6 036,00 Kč
Backordered item
RCBS Matchmaster – Full Length Bushing Die Set for caliber .224 VALKYRIE. Matchmaster seating die with bullet seating window and with bullet retaining system.
6 036,00 Kč
Backordered item
RCBS Matchmaster – Full Length Bushing Die Set for caliber 6x47 Lapua. Matchmaster seating die with bullet seating window and with bullet retaining system.
6 036,00 Kč
Backordered item
RCBS Matchmaster – Full Length Bushing Die Set for caliber .25-06 Remington. Matchmaster seating die with bullet seating window and with bullet retaining system.
6 036,00 Kč
Backordered item
RCBS Matchmaster – Full Length Bushing Die Set for caliber 6mm Dasher. Matchmaster seating die with bullet seating window and with bullet retaining system.
6 036,00 Kč
Backordered item
RCBS Matchmaster – Full Length Bushing Die Set for caliber 6.5mm x 47 Lapua. Matchmaster seating die with bullet seating window and with bullet retaining system.
6 036,00 Kč
Backordered item
RCBS Matchmaster – Full Length Bushing Die Set for caliber 7mm Remington Magnum. Matchmaster seating die with bullet seating window and with bullet retaining system.
6 036,00 Kč
Backordered item
RCBS Matchmaster – Full Length Bushing Die Set for caliber 7mm-08 Remington. Matchmaster seating die with bullet seating window and with bullet retaining system.
6 036,00 Kč
Backordered item
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber 6MM CREEDMOOR
1 697,00 Kč
Backordered item
RCBS® pioneered and developed 3-Die Sets for straight-wall rifle and pistol cases. 3-Die Roll Crimp Sets feature a steel Sizer Die, Expander Die and Roll Crimp Seat Die. Caliber .360 BUCKHAMMER
2 451,00 Kč
Backordered item
RCBS® pioneered and developed 3-Die Sets for straight-wall rifle and pistol cases. 3-Die Taper Crimp Set features a steel Sizer Die, Expander Die and Taper Crimp Seat Die. Caliber 450 Bushmaster.
2 451,00 Kč
Backordered item
The RCBS® Taper Crimp Seater Die is designed to seat bullets and crimp them securely in place using a built-in taper crimp. Caliber Bushmaster 450
1 772,00 Kč
Backordered item
RCBS® pioneered and developed 3-Die Sets for straight-wall rifle and pistol cases. 3-Die Roll Crimp Sets feature a steel Sizer Die, Expander Die and Roll Crimp Seat Die. Caliber 350 Legend
2 451,00 Kč
Backordered item
The RCBS® Taper Crimp Seater Die is designed to seat bullets and crimp them securely in place using a built-in taper crimp. Caliber 350 Legend
1 772,00 Kč
Backordered item
RCBS Full Length Die Set 224 VALKYRIE. This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug.
2 980,00 Kč
Backordered item
RCBS Full Length Die Set 22 Creedmoor. This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug.
2 980,00 Kč
Backordered item
