Reloading Dies
Reloading dies are special tools that are fixed into the tool head of the press and are specific for each calibre.
There are 6 basic functions of dies: de-priming, sizing, powder charging, expanding, seating and crimping.
The sizing and depriming functions are usually combined in one die, wherethe case is cleared of the old primer and sized to factory dimensions. The sizing is performed either on the entire length of the cartridge case (full length sizing) or just a neck only (collet/neck sizing dies - available only for bottle cases).
The expanding and powdering function is most often combined in pistol calibre dies. The purpose of the expanding function of the die is to create a slight flare on the neck of the brass case to make it easier to seat the bullet. During this operation, the case may also be charged with gunpowder using either attached automatic powder dispenser, or manually through attached powder funnel.
The seating die is used for the accurate seating of the bullet
Number of records: 5252
Reinforced guide decapper for use with case mouth diameters of .397" or larger (.416 Remington to .43 Spanish, .44-40, .444 Marlin, .40-60). For use with the LEE Universal Decapping Die.
144,00 Kč
In stock
Reinforced decapping pin with guide rod for cases with necks .448" and larger (.45/70 Gov., .450 Bushmaster, .45-75, .458 Win. Mag.). For use with the LEE Universal Decapping Die.
144,00 Kč
In stock
LEE .003" Undersize Carbide Sizing Die Only
860,00 Kč
In stock
Sale
8X57 Mauser LEE ULTIMATE RIFLE DIE SET
2 007,00 Kč
In stock
Lee Precision 6,5 PRC Collet Necksizing Die for ammo reloading. Deprimes the case and sizes just the neck, so it requires no lubrication. Thread 7/8"-14.
860,00 Kč
In stock
.400 Legend STEEL LEE 3 DIE SET
1 405,00 Kč
In stock
Lee crimp die only .400 Legend for ammo reloading. Firmly and precisely crimps bullet in case and increases accuracy of loaded ammo. Standard thread 7/8-14. Lee 92080 Collet Style Crimp Die
459,00 Kč
In stock
Lee PM Expanding Plug - spare part for Lee powder-through expanding die.
156,00 Kč
In stock
Lee seating plug 32 S&W / 7,65 Browning (32 ACP) / 32 H&R- spare part for Lee seating die.
156,00 Kč
In stock
Headed pins are for most current production expander-decapping and decapping rods. X-small pins are designed to use with undersized flash holes, and have a diameter of .057 inch.
491,00 Kč
In stock
RCBS Expander/Decapping Unit features a decapping rod, TICN coated expander ball (that reduces neck expansion force by 10 percent), and decapping pin. For calibers: .30 Cal.
391,00 Kč
In stock
The micrometer adjust screw for LEE pistol bullet seating dies. Allows precise adjustment of bullet seating depth in dies that do not have a built-in micrometer scale.
574,00 Kč
In stock
The micrometer adjust screw for LEE rifle bullet seating dies. Allows precise adjustment of bullet seating depth in dies that do not have a built-in micrometer scale. For .34 caliber and smaller rifle cartridges.
574,00 Kč
In stock
The micrometer adjust screw for LEE large caliber rifle bullet seating dies. Allows precise adjustment of bullet seating depth in dies that do not have a built-in micrometer scale. For .35 caliber and larger rifle cartridges.
574,00 Kč
In stock
High-end 9,3x64 Brenneke Benchrest Necksizing Die for precision ammo reloading. Standard 1 1/4″-12 thread. Made by Triebel Waffenwerkzeuge Gmbh.
6 259,00 Kč
In stock
Interchangeable Neck Sizer Ring (Bushing) for the Necksizing Die TRIEBEL. Outer diameter of the bushing: 12,7 mm.
Seater head for TRIEBEL reloading dies. Calibre and type (shape) of the bullet according to your requirement.
Interchangeable Neck Expander for calibrating the inside of the case neck. Designed for TRIEBEL dies.
Extends case life. A "Must-Have" die for the cast bullet or flat-base bullet user. Designed for .300 AAC Blackout, .30 M1 Carabine
961,00 Kč
In stock
RCBS Matchmaster – Full Length Bushing Die Set for caliber 7mm PRC. Matchmaster seating die with bullet seating window and with bullet retaining system.
6 036,00 Kč
In stock
RCBS Matchmaster Seater Die for caliber 7mm PRC with bullet seating window and with bullet retaining system.
4 225,00 Kč
In stock
The RCBS Supreme Die Set combines a full length sizing die and seater die, shell holder and chamber case length gauge to provide a comprehensive and convenient reloading solution for rifle cartridges.
2 640,00 Kč
In stock
The RCBS Supreme Die Set combines a full length sizing die and seater die, shell holder and chamber case length gauge to provide a comprehensive and convenient reloading solution for rifle cartridges.
2 640,00 Kč
In stock
The RCBS Supreme Die Set combines a full length sizing die and seater die, shell holder and chamber case length gauge to provide a comprehensive and convenient reloading solution for rifle cartridges.
2 640,00 Kč
In stock
The RCBS Supreme Die Set combines a full length sizing die and seater die, shell holder and chamber case length gauge to provide a comprehensive and convenient reloading solution for rifle cartridges.
2 640,00 Kč
In stock
RCBS Matchmaster – Neck Size Bushing Die Set for caliber 6.5mm Creedmoor. Matchmaster seating die with bullet seating window and with bullet retaining system.
6 036,00 Kč
In stock
Seating die for precise reloading. Features a loading window for easy bullet insertion, micrometer depth adjustment, and a self-centering seating stem for perfect alignment.
4 225,00 Kč
In stock
Seating die with loading window for easy bullet insertion, bullet retention system, micrometer depth adjustment, and self-centering seating stem for perfect alignment.
4 225,00 Kč
In stock
Seating die with loading window for easy bullet insertion, bullet retention system, micrometer depth adjustment, and self-centering seating stem for perfect alignment.
4 225,00 Kč
In stock
The RCBS Supreme Die Set combines a full length sizing die and seater die, shell holder and chamber case length gauge to provide a comprehensive and convenient reloading solution for rifle cartridges.
2 640,00 Kč
In stock