Reloading dies are special tools that are fixed into the tool head of the press and are specific for each calibre.
There are 6 basic functions of dies: de-priming, sizing, powder charging, expanding, seating and crimping.
The sizing and depriming functions are usually combined in one die, wherethe case is cleared of the old primer and sized to factory dimensions. The sizing is performed either on the entire length of the cartridge case (full length sizing) or just a neck only (collet/neck sizing dies - available only for bottle cases).
The expanding and powdering function is most often combined in pistol calibre dies. The purpose of the expanding function of the die is to create a slight flare on the neck of the brass case to make it easier to seat the bullet. During this operation, the case may also be charged with gunpowder using either attached automatic powder dispenser, or manually through attached powder funnel.
The seating die is used for the accurate seating of the bullet
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber 7.7X58 JAP ARI
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber 7.5MM SCH-RUBIN
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber .303 BRIT
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber .32 WIN SPEC
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber 8X57 MAUSER
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber .338 RCM
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber .338 FEDERAL
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber .338 LAPUA
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber .338 WIN MAG
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber .35 WHELEN
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber .357 SIG
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber .358 WIN
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber 9.3X62 MAUSER
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber .340 WBY MAG
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber .375 H&H MAG
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber .375 REM ULTRA MAG
The RCBS Roll Crimp Seater Die is designed for seating bullets and features an integrated Roll Crimp function that crimps the bullet as it is being seated.
RCBS 9mm Luger 9x21 Carbide 3-Die Taper Crimp Set has a Sizer Die with Decapping Unit, Expander Die and a Seater Die for seating and crimping the bullet.
We use cookies to collect and analyze information about site performance and usage, to make social media features work, and to improve and personalize content and ads.
We use cookies to collect and analyze information about site performance and usage, to make social media features work, and to improve and personalize content and ads.
We need your consent to display this content!
This content may collect data about your activities. Consent is required to view the content.
