Reloading Dies
Reloading dies are special tools that are fixed into the tool head of the press and are specific for each calibre.
There are 6 basic functions of dies: de-priming, sizing, powder charging, expanding, seating and crimping.
The sizing and depriming functions are usually combined in one die, wherethe case is cleared of the old primer and sized to factory dimensions. The sizing is performed either on the entire length of the cartridge case (full length sizing) or just a neck only (collet/neck sizing dies - available only for bottle cases).
The expanding and powdering function is most often combined in pistol calibre dies. The purpose of the expanding function of the die is to create a slight flare on the neck of the brass case to make it easier to seat the bullet. During this operation, the case may also be charged with gunpowder using either attached automatic powder dispenser, or manually through attached powder funnel.
The seating die is used for the accurate seating of the bullet
Number of records: 5419
Lee crimp die only .25-45 Sharps for ammo reloading. Firmly and precisely crimps bullet in case and increases accuracy of loaded ammo. Standard thread 7/8-14. Lee 91107 Factory Crimp Die.
23,92 EUR
Backordered item
For setting the seating depth of bullet seater dies and bench-rest bullet seater dies. New version.
34,50 EUR
Backordered item
RCBS Small Base Taper Crimp die set for semi-automatic rifles. Includes a Small Base sizing die and a bullet seating die with 7° taper crimp for maximum feeding reliability in AR platforms.
89,09 EUR
Backordered item
RCBS Small Base Taper Crimp die set for semi-automatic rifles. Includes a Small Base sizing die and a bullet seating die with 7° taper crimp for maximum feeding reliability in AR platforms.
89,09 EUR
Backordered item
RCBS Full-Length Die Set for bottleneck cases. Includes full-length sizing die with expander-decapping unit and seating die with roll crimp. Thread 7/8"-14.
76,13 EUR
Backordered item
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber 6.8 Western
76,13 EUR
Backordered item
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber 7MM PRC
76,13 EUR
Backordered item
RCBS Full-Length Die Set for bottleneck cases. Includes full-length sizing die with expander-decapping unit and seating die with roll crimp. Thread 7/8"-14.
76,13 EUR
Backordered item
RCBS® pioneered and developed 3-Die Sets for straight-wall rifle and pistol cases. 3-Die Roll Crimp Sets feature a steel Sizer Die, Expander Die and Roll Crimp Seat Die. Caliber .360 BUCKHAMMER
111,75 EUR
Backordered item
RCBS® pioneered and developed 3-Die Sets for straight-wall rifle and pistol cases. 3-Die Taper Crimp Set features a steel Sizer Die, Expander Die and Taper Crimp Seat Die. Caliber 450 Bushmaster.
111,75 EUR
Backordered item
The RCBS® Taper Crimp Seater Die is designed to seat bullets and crimp them securely in place using a built-in taper crimp. Caliber Bushmaster 450
80,96 EUR
Backordered item
RCBS® pioneered and developed 3-Die Sets for straight-wall rifle and pistol cases. 3-Die Roll Crimp Sets feature a steel Sizer Die, Expander Die and Roll Crimp Seat Die. Caliber 350 Legend
111,75 EUR
Backordered item
History of visited articles
