Reloading Dies
Reloading dies are special tools that are fixed into the tool head of the press and are specific for each calibre.
There are 6 basic functions of dies: de-priming, sizing, powder charging, expanding, seating and crimping.
The sizing and depriming functions are usually combined in one die, wherethe case is cleared of the old primer and sized to factory dimensions. The sizing is performed either on the entire length of the cartridge case (full length sizing) or just a neck only (collet/neck sizing dies - available only for bottle cases).
The expanding and powdering function is most often combined in pistol calibre dies. The purpose of the expanding function of the die is to create a slight flare on the neck of the brass case to make it easier to seat the bullet. During this operation, the case may also be charged with gunpowder using either attached automatic powder dispenser, or manually through attached powder funnel.
The seating die is used for the accurate seating of the bullet
Number of records: 5252
Die set 9x57 Mauser Imp 30. Quality product made by CH4D.
4 024,00 Kč
On order
Die set 9x57 Mauser Imp 40. Quality product made by CH4D.
4 024,00 Kč
On order
Die set 9x63. Quality product made by CH4D.
4 024,00 Kč
On order
Die set 9x63 Imp 30. Quality product made by CH4D.
4 024,00 Kč
On order
Die set 9x63 Mauser. Quality product made by CH4D.
4 024,00 Kč
On order
Die set 9x63 Miller Geiss. Quality product made by CH4D.
4 024,00 Kč
On order
Die set 9x68R Swedish. Quality product made by CH4D.
5 758,00 Kč
On order
Die set 9x69R. Quality product made by CH4D.
5 758,00 Kč
On order
Die set 9x71. Quality product made by CH4D.
6 521,00 Kč
On order
Die set 9x71 Peter Longo. Quality product made by CH4D.
6 521,00 Kč
On order
Die set 9x72 Bwanna-Be. Quality product made by CH4D.
5 758,00 Kč
On order
Die set 9x72. Quality product made by CH4D.
6 521,00 Kč
On order
Die set 9x74R. Quality product made by CH4D.
5 758,00 Kč
On order
Interchangeable expander ball for sizing the inside of the case neck. Designed for CH4D dies. Please specify the desired expander diameter in the order notes.
498,00 Kč
On order
A single CH4D Taper Crimp Die 5,6x52R only.
2 464,00 Kč
On order
High-end 8,5x68 Fanzoj FL Sizing Die for precision ammo reloading. Standard 1 1/4″-12 thread. Made by Triebel Waffenwerkzeuge Gmbh.
6 854,00 Kč
On order
Necksizing die 5,6x52R. Quality product made by CH4D, USA.
2 635,00 Kč
On order
High-end 8,5x68 Fanzoj Benchrest Seating Die for precision ammo reloading. Standard 1 1/4″-12 thread. Made by Triebel Waffenwerkzeuge Gmbh.
6 854,00 Kč
On order
Bushing insert for necksizing die. Quality product made by CH Tool & Die, USA.
615,00 Kč
On order
Bushing insert for necksizing die. Quality product made by CH Tool & Die, USA.
794,00 Kč
On order
CH4D_LBNST Large Bushing Neck Sizer short
5 257,00 Kč
On order
Necksizing die 6.5x53 R Dutch. Quality product made by CH4D, USA.
2 860,00 Kč
On order
High-end 204 Ruger Benchrest Seating Die for precision ammo reloading. Standard 7/8″-14 thread. Made by Triebel Waffenwerkzeuge Gmbh.
5 678,00 Kč
On order
High-end 5,45x39 Benchrest Seating Die for precision ammo reloading. Standard 7/8″-14 thread. Made by Triebel Waffenwerkzeuge Gmbh.
4 589,00 Kč
On order
High-end 5,6x50 Magnum Benchrest Seating Die for precision ammo reloading. Standard 7/8″-14 thread. Made by Triebel Waffenwerkzeuge Gmbh.
4 589,00 Kč
On order
High-end 5,6x50 R Magnum Benchrest Seating Die for precision ammo reloading. Standard 7/8″-14 thread. Made by Triebel Waffenwerkzeuge Gmbh.
4 589,00 Kč
On order
High-end 5,6x52 R Benchrest Seating Die for precision ammo reloading. Standard 7/8″-14 thread. Made by Triebel Waffenwerkzeuge Gmbh.
4 589,00 Kč
On order
High-end 5,6x57 Benchrest Seating Die for precision ammo reloading. Standard 7/8″-14 thread. Made by Triebel Waffenwerkzeuge Gmbh.
5 678,00 Kč
On order
High-end 5,6x57 Benchrest Seating Die for precision ammo reloading. Standard 1 1/4″-12 thread. Made by Triebel Waffenwerkzeuge Gmbh.
5 678,00 Kč
On order
CH4D - 30/30 Winchester Crimp Die
1 561,00 Kč
On order