Ballistol Suppressor Cleaner, 500 ml

Ballistol Suppressor Cleaner

Self-cleaning · Acid-free · Material-friendly

Specialized suppressor cleaner with surfactants, acid-free. Automatically dissolves and neutralizes fouling residues without the need for tools. Contains corrosion inhibitor and is gentle on surface finishes.

Volume: 500 ml

Instructions for use:

1. Seal the suppressor on one end and fill it completely with the cleaner. Let it act for at least 2 hours – fouling residues will dissolve on their own.
2. For suppressors exposed to high firing loads, slightly heat the cleaner (approx. 40 °C) and extend the exposure time to at least 4 hours.
3. Then remove the cleaner from the suppressor.
4. To remove remaining residues:
   • Fill the suppressor halfway with clean water, seal the other end, and shake thoroughly.
   • Repeat as needed until the water is free of soot particles.
5. If the suppressor cannot be sealed due to its design, it can be fully immersed in the cleaner.
6. Suitable also for disassembled suppressors – immerse dirty parts in the cleaner, then brush and rinse with water after the exposure time.

Warning:

Always verify compatibility of the cleaner with surface finishes and coated parts before use.