Dillon XL650/XL750 Shellplate #5 with Case Retainer Spring

Dillon XL650/XL750 Shellplate #5 with Case Retainer Spring

Shellplate No.5 with pack of Case Retainer Springs. Designed for Dillon XL650/XL750 Reloading presses.

Shellplate #5 is designed for calibers:

• 9mm, .38 Super, 9x21
• 9x18 Makarov
• .30 Luger, 7,62x25mm Tokarov

Anti-Wobble Case Retainer

Shellplate features a milled groove for a case retainer spring that mounts on the Dillon's frame and securely holds cases in place while cycling the press. Due to the universal spring, you don't need to use locator buttons anymore.

Improved Toughness

Armanov Shellplates are made out of hardened and tempered Toolox® steel, which is known for its strength and wear resistance.

Powder Extraction System

Milled channels in the bottom of the shellplate will catch and extract any spilled powder or debris for the smoothest operation.

Easy Inspection

Spring enables a quick OAL or powder check by simply pulling out and reinserting the case in the desired station.

RECOMMENDATION: We recommend using an Index Cam Block equipped with a Primer Depth Stop system for consistency in primer seating depth during the reloading process.

WARNING: The tension in the spring may cause the press not to index properly. If this occurs, adjust the position of the Index Cam Block to allow for additional rotation of the shellplate.

NOTE: Please refer to the Dillon Caliber Conversion Chart to select the appropriate Shellplate.