NewsBack in stock

RCBS
RCBS




Thanks to powerful ultrasonic action, the Ultrasonic Case Cleaner 2 (240VAC-INTL) quickly and effectively removes dirt, grease, and residue from brass cases without damaging them, leaving them clean and ready for reloading.

712,55 EUR 
In stock

RCBS Expander/Decapping Unit features a decapping rod, TICN coated expander ball (that reduces neck expansion force by 10 percent), and decapping pin. For calibers: 7mm

17,84 EUR 
In stock

RCBS 38-55 Winchester & Ballard 3-Die Set has a Sizer Die with Decapping Unit, Expander Die and a Seater Die for seating and crimping the bullet.

113,38 EUR 
In stock

RCBS Small Base Taper Crimp die set for semi-automatic rifles. Includes a Small Base sizing die and a bullet seating die with 7° taper crimp for maximum feeding reliability in AR platforms.

89,09 EUR 
In stock

Expander plug for RCBS Neck Expander Die to expand the case neck. Used with RCBS Neck Expander Plug Rod (#39801).

19,84 EUR 
In stock

RCBS LEAD DIPPER

RCBS_80015

The RCBS® Lead Dipper is an essential tool for any bullet caster. With its large-capacity bowl, this dipper makes scooping and stirring lead easy and efficient.

49,55 EUR 
In stock

The RCBS Stainless Steel Dial Caliper is a high-quality tool that can help handloaders achieve accurate and precise measurements.

87,46 EUR 
In stock

RCBS Lube-A-Matic Sizer Die .430 casts lead bullets to the proper diameter and adds bullet lube to grease grooves.

57,80 EUR 
In stock

RCBS Precision Mic 7MM REM MAG Dies allow you to determine chamber headspace and bullet seating depth to 0.001 inch.

119,84 EUR 
In stock

This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. Caliber 7MM REM MAG

76,13 EUR 
In stock

RCBS Extended Shell Holder No. 18 for single-stage and turret reloading presses. Designed for calibers: .44 Magnum, .44 S&W Russian, .44 Special

22,67 EUR 
In stock

The RCBS Small Base Sizer Die Set is designed specifically for reloading bottleneck cases that will be used in tight-chambering semi-automatic, pump, or lever-action rifles.

80,96 EUR 
In stock

Trim a bottleneck case once and never trim again with the RCBS .223 REM X Die Full Length Die Set, which includes an X Die Sizer and Standard Seater Die.

102,05 EUR 
In stock

RCBS Chamber/Case Length Gauge .300 AAC Blackout allows quick cartridge inspection. Checks chamber fit, length and diameter for reliable and safe ammo function.

42,13 EUR 
In stock

RCBS Lube-A-Matic Sizer Die .265 casts lead bullets to the proper diameter and adds bullet lube to grease grooves.

57,80 EUR 
In stock

The set includes a MatchMaster micrometer seating die with a window for easy bullet placement and a Full-Length sizing die. Ensures precise, repeatable reloading without the use of bushings.

220,13 EUR 
In stock

This adapter in .17 caliber is designed for the RCBS MatchMaster Aluminum Powder Funnel. Its unique interior shape ensures a secure fit for precise and spill-free powder flow into the case mouth.

23,92 EUR 
In stock

The RCBS ChargeMaster Supreme Electronic Powder Dispenser smart digital scale and powder dispenser offers easy operation, speed and accuracy of +/-0.1 grains and Bluetooth technology.

644,63 EUR 
In stock

Small pins are for pre-1990s collet-style rods designed for small-primer cartridges, as well as for current competition-style dies/rods, X Die® mandrels, PPC and .357 Sig. 5-Pack

4,88 EUR 
In stock

Set of 2 rifle dies in caliber .30R Blaser. Includes Full-Length Sizer Die and Seater Die. Standard 7/8"-14 thread.

134,42 EUR 
In stock

The RCBS Die Storage box features a unique cradle design to hold up to three dies when not in use to prevent damage. Spare GREEN storage box for RCBS dies.

9,71 EUR 
In stock

Dust cover for RCBS single-stage presses.

24,30 EUR 
In stock

These RCBS® factory replacement decapping units are the same ones we ship with our products — so you can rest assured they will work. RCBS Expander/Decapping Unit caliber .226

14,59 EUR 
In stock

Double-cavity RCBS Bullet Mould for casting lead bullets. Designed for 9 mm caliber bullets weighing 124 grains with a Conical Nose (CN) profile.

252,59 EUR 
In stock

RCBS Shell Plate #23 for PRO Chucker 5 progressive press.
Designed for calibers: .32 H&R Magnum, .32 Smith & Wesson Long, .327 Federal Magnum

97,17 EUR 
In stock

Double-cavity RCBS Bullet Mould for casting lead bullets. Designed for .25 bullets weighing 85 grains, bullet type CM (Cowboy Mould).

252,59 EUR 
In stock

RCBS Precision Mic .300 WIN MAG Dies allow you to determine chamber headspace and bullet seating depth to 0.001 inch.

119,84 EUR 
In stock

RCBS Neck 2-Die Set 6.5X55 SWED MAU includes a Neck Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug.

80,96 EUR 
In stock

These RCBS® factory replacement decapping units are the same ones we ship with our products — so you can rest assured they will work. RCBS Expander/Decapping Unit caliber 8MM

14,59 EUR 
In stock

RCBS Matchmaster – Full Length Bushing Die Set for caliber 6.5mm Creedmoor. Matchmaster seating die with bullet seating window and with bullet retaining system.

259,05 EUR 
In stock
Loading...

Basket contains not allowed items

Shopping cart is empty

Show basket

The article was added to comparison

Please wait...
Unable to complete your order, please try again later
Error adding to basket
Invalid combination – the basket contains a loyalty program gift that can only be redeemed in a separate order.
Error removing from basket
The gift can only be redeemed in a separate order.
The gift can only be redeemed with the purchase of at least one item.
Point redemption is blocked
Gift has been added to the basket
Error adding gift to cart
You do not have enough points to add this item to the cart
Gift is out of stock
Product watch has been set successfully. We will notify you by email.
The request cannot be submitted. Please try again later
We will display the website in this language:
Show other options
Výběr jazyka